SIPLACE D3 Spare Parts
-
CABLE:VALVE LIFT.TABLE DOWN CONV.BOARD
-
Cable docking unit X-series: NC-CAN-node
-
5/2 spool value G1/8 DN 4MM
-
trailing-cable unit SIPLACE X-Series 1P
-
TURNING SYSTEM/DLM
-
tape cutter pneum. SIPLACE HF / X-Series
-
El.-Mag.-Valve CPE10-M1BH-5/3G-QS6-B
-
Light barrier z-axis top
-
Round cable set: C+P-Cam. (Type28,29,38)
-
trailing-cable unit SIPLACE X-Series 2PU
-
Sleeve with ball fixing compl. DLM1 / 12
-
Koplan optoNCDT ILD 2200-3
-
Tee hose nipple LO 3000-2.5
-
3/2 pressure regulator
-
holder dropping tank P001
-
CPU-PCB. SMP16-CPU086 1,6GHz 768MB
-
SHAFT DLM1 / 6
-
Additional high resolution, stationary component camera digital in X-Series,D1,D3 machines for centering of FlipChips. With this head a component range from 0.2mm x 0.2mm up to 16mm x 16mm can be placed. The smallest ball diameter is 80um, the min. Lead /
-
Cover in-rush current limiter
-
Pressure regulator, flange type, 0-4bar
-
bush bearing subsequent work
-
12-segm. star compl. DLM3
-
MAGAZINE FOR NOZZLE TWIN HEAD
-
PCB -CAMERA MULTICOLOR (Typ 24) 28 dig
-
FLAP INPUT/OUTPUT D3 COMPLETE
-
HCU cpl.
-
Swing top compl. / R2
-
6-Segm. Stern kplt. DLM3
-
Nozzle Changer, 12-Nozzle Head, HF
-
COMPONENT-CAMERA C+P(Type28) 18x18 digital RK
-
CAN-Bus: IC and FC camera
-
Plastic tube PUN-CM-6-SW antistat.
-
Inrush current limiter transformer
-
12-segm. C+P head DLM3 / w.out sleeves
-
Nozzle Changer 6, Turned 90 degrees, HF
-
COMP.CAMERA P+P (TYP33) 55x45 digit.
-
Vision Hotlink Adapter VHA
-
spring 1.8x10.2x62.7 (D-234B) (black)
-
Hose for to fetch back unit z-axis
-
6-segm. C+P head DLM3 / w.out sleeves
-
COMP. MAGAZINE COMP. /2 NOZZLES P+P
-
COMPONENT-CAMERA C+P(Type29) 27x27 digital RK
-
trailing-cable unit SIPLACE X--Series 1P
-
Swiveling Unit Lifting Table
-
Dropping Tank, cpl.
-
HOSE 4*2,5 PUR TU 0425 BU-20
-
Hub-Controller
-
COMP.-CAMERA STAT.P+P (Type25)16x16 dig.
-
trailing-cable unit SIPLACE X-Series 2PU
-
Air distributor compl.
-
Arresting cable 2x230 with thimbles
-
HOSE COMPL. / DLM1
-
Axis Unit A364
-
C-O-TABLE DOCK-IN, COMPL. R2
-
CYLINDER 50x60 SA-207074
-
trailing-cable unit SIPLACE X-Series 2P G
-
Axis Unit A364
-
Follower item for 03052590-03 Can-card PowerCAN-PCI Please pay attention to technical information TI2011-09C01: Up to SW705.03 a driver SW installation is needed. Therefore the replacement of the CAN-PCB can only be done by a SIPLACE Service expert. Becau
-
Silicone rubber hose Di 8 Da 12 el.conductive
-
Barcode-Reader 2D ICR850-2Z1920S06
-
Pick+Place-Modul/THK
-
Vision Board Spread Spectrum X (VBSX)
-
air filter complete
-
AXIAL BLOWER
-
Solenoid Valve 5/2-Micro Valve 518
-
nozzle type 720/920 cpl.
-
HOLDER SICK BC-READER
-
Positioning unit dp-Station
-
Video multiplexer
-
PS2-Tastatur Active Key mit Touch-Pad
-
Read head MS40 TWIN z-axis
-
Valve Plunger complete SP12 (plastic)
-
USB-Keyboard Active Key with Touch-Pad
-
DC-DC-Converter Lambda Vega 650
-
Video multiplexer KSP-VMP-S50/HF
-
Pneumatic X-Serie R3
-
Strain relief Z encoder Twin
-
Valve Plunger complete SP6 (plastic)
-
Monitor SCD1520-TDC
-
CABLE: MONITOR VGA-BNC
-
MOUNTING CLAMP d=5 H2P
-
pressure regulating G1/2 (34203054)
-
Digital-Valve /Twin-Head
-
The component sensor as additional optical sensor module verifies the presence / absences of a small component short just before placement / pickup respectively. Suitable for all SIPLACE S-27 HM, X/D-Series and HS-xx in combination with the 12-Segment Col