-
Linear vibration feeder module for components in stick maga- zines. Magazine width 4,5mm 9.5mm, 15mm, 30mm - SIPLACE 80S / 80F - MS/SP/HS With SIPLACE machines item no. 116140 required, with MS-72/90/128/SP/HS machines and integrated potentiometer item no -
Feeder with tape return mechanism for tantalum capacitor types C/D for 1 x 12mm tape with electric motor and cover foil pick-up, 4-16mm feeder pitch, for SIPLACE HS-50, SIPLACE 80 S-15/S-20/S-23 and SIPLACE 80 F/F4/F5 HM.
-
Feeder with tape return mechanism for tantalum capacitor types E for 1 x 12mm tape with electric motor and cover foil pick-up, 4-16mm feeder pitch, for SIPLACE HS-50, SIPLACE 80 S-15/S-20/S-23 and SIPLACE 80 F/F4/F5 HM.
-
Package for placement of 01005 components (size 0.4mm x 0.2mm). Suitable for the SIPLACE D4/D2/D1 equipped with the 12 Collect & Place Head (DLM3). The component range will be from 01005 up to the maximum of 16mm x 16mm. The package includes: 1 x High res
-
Package for placement of 0201 components (size 0.6mm x 0.3mm). Suitable for SIPLACE X-Series (SCSW 605)equipped with the 12-Segment Collect and Place head. The Package includes: High resolution camera (Exchange between standard digital component camera. T
-
The Feeder Protection consists of a cover over the feed area (119622,119755). If a feeder is pressed up or if feeder flaps are projecting upwards, the EMERGENCY OFF is actuated. The option contains one protection plate, which can be installed in location
-
The Feeder Protection consists of a cover over the feed area (119622,119755). If a feeder is pressed up or if feeder flaps are projecting upwards, the EMERGENCY OFF is actuated. The option contains one protection plate, which can be installed in location
-
Mechanical Head Crash Protection for SIPLACE S-20, S-23 HM, S-25 HM and S-27 HM to avoid a head crash with feeders and/or feeder flaps. Restriction 6-Segment Collect and Place Head with nozzels type 820/821/921.
-
The component sensor as additional optical sensor module verifies the presence / absences of a small component short just before placement / pickup respectively. Suitable for all SIPLACE S-27 HM, X/D-Series and HS-xx in combination with the 12-Segment Col
-
Additional nozzle changer for IC head
-
Additional component vision module SIPLACE 80 F/F4/F5 for flip chip bump centering. Field of view: 9mmx11.5mm. Largest flip chip with single measurement: 7mm x 9mm.Smallest,reliably recognizable bump diameter: 0,1mm. Reliable processing of IC pitch: 0,25m
-
Nozzle changer for 6 nozzle C+P Head SIPLACE 80 F4/F5 Station software version 403.xxx or higher Line computer software 403.xxx or higher Option includes: 2 magazines for big nozzles 3 magazines for small nozzles
-
Regulator unit for linear and bulk vibrator feeders for use with 142025 Type II. Required for use with SIPLACE . 1 regulator unit required per module.
-
Pack for 3x8mmS-Feeder
-
Feeder Bags 650mm
-
nozzle type 703//903 Vectra-Ceramic
-
Nozzle- 2821 cpl.
-
Nozzle-2005 cpl.
-
Nozzle- 2039cpl.
-
Nozzle- 2038cpl.
-
Nozzle-2032 cpl.
-
Nozzle- 2021 cpl.
-
Nozzle- 2020 cpl.
-
nozzle type 1007 cplt.
-
Nozzle type 2006 cpl. / ceramic
-
Nozzle Typ 1006 kpl.
-
NOZZLE TYPE 1135 compl./ 2 part Nozzle
-
NOZZLE TYPE 1035 compl